Unsuitable engraving material: Those materials unable to burn focus For example Pure metal(without coating), transparent plastic, White paper(Astigmatic), PP plastic, etc.Windows and Mac. How to.
Descargar Para Neje Dk-8 Grabador Para Software And DriverDownload Neje software and driver at the end of the article (Can not engrave metal.
For engraving metal use NEJE MASTER 7W OR NEJE MASTER 20W) Important safety information Please do not touch the laser or a laser beam when the facility is working. The laser does not have Radiation, but when it works the temperature is getting up to 400 centigrade. The laser facility passed the CE, safety control, and have no radiation. The laser facility is powered by 5V, 2A USB charger, Do not use other power. The suggested time of use is not more than one hour at once except is mentioned other. It is prohibited for children to use the laser facility without adult supervision. Please pay attention to keep the surface of the facility clean. Power by security and polymer battery, no explosion risk of spontaneous combustion. The facility no usage for a long time can automatically lead to dormancy mode. Descargar Para Neje Dk-8 Grabador Para Install A FacilityControl by Computer Before you can use a computer and laser facility for engraving, you need to install a facility driver which allows the facility to communicate with the computer, furthermore, you need to install application software on your computer so that you can start your engraving. The same situation applies to the Laser Engraver, you need to install the USB-Serial driver which allows the Laser Engraver to talk to the computer, and you need to install the engraver software to control the Laser Engraver. NEJE DK-8-KZ, DK-8 PRO-5, DK-6 PRO-5, JZ-5, JZ-5-T, DK-5 Pro-5 engraver comes with a 1GB micro SD card, the files on the SD card are including the USB-Serial driver, engraver software and few JPG photos as shown in the figure below. The software is compatible with Win XP, Win 7, Win 8, Win 10, system. Prepare: We will use the gray cardboard to carve as an example to explain, please follow the instructions to do your operation. Obtain a desktop computer or laptop computer (computer operating system requirements is WinXP, window 7, win8, win10); Obtain a USB rechargeable head (5V1A) (Apple, Samsung, Huawei mobile phone head can be, Support 5V1A or more); Open the packaging, remove the fixed tape and pearl cotton on the machine; Adjust the focal length of the laser, factory default settings the focal length of the gray cardboard, there is no need to do any adjustment. If you need to carve the object in different thickness, you need to place the object in the engraving platform and adjust the focus manually, when in the first operation, it is recommended to use gray cardboard (in the package list) to carve; The method of adjusting the focal length as follow: 1: Fixed the surface of the carved objects at the level of the bearing table, put on the focusing glasses( sent in random) (maybe will not adapt it at the beginning, just to be used as the focus), rotate the focus head manually, shown in the figure: 2: Observe the light down to the surface in the smallest point of the object, when the rotation to the smallest point, indicating that the focal length has been adjusted, note that the smaller the focus adjustment, the image engraving effect is finer, if the focal length is not adjusted, there may be no image to be carve; Safety precautions: 1. Our machine certified to CE and FDA certification, the radiation values far below the EU and the United States standards, please rest assured that use; 2. If the hand touch the laser in accidentally when in work, dont worry about that it will not burn your hand; 3. The top design of the machine has an emergency pause button that can be used in an emergency Step 1: Connection As shown in the picture: Connect the round port USB cable to the 5V1A power adapter; connect the D port data cable to the computer USB port; After the connection, the machine will detect the edge distance automatically, and then start the second step. Descargar Para Neje Dk-8 Grabador Para Download And DecompressStep 2: Install the driver drive and software for windows, click me to download (the software have updated from 2017.11.1) download and decompress before the installation, first install the driver, then install the software, first connect the machine to the computer and then install): download and decompress, first install the driver, as shown below, after the success of the installation click to confirm bottom, and then close the installation window; Step 3: Start the software a. ![]() If you start the software, appear such a prompt (see below), please download the.net framework 4.0 click me download or download from microsoft.com. Microsoft.NET Framework 4 (Standalone Installer) b. Test the text print Enter my test, you can select font, select the font and the font size, and then click insert, click the middle of the software area, then insert the text to print the area; What materials can be carved, how to fix materials Objective engraving material: Smooth, Organic, opaque, Non- flame- retardant material For example Wood, Gray cardboard, bamboo, Leather, etc.
0 Comments
Leave a Reply. |
Details
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |